ASHRAE 110, CE and ISO certified.
Structure: 1.2mm thickness high quality cold-rolled steel with 85μm thickness of static epoxy resin power coated
Lining: Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels Made out of durable Phenolic integral work walls (5 mm thick).
Sash Opening: Minimum: 50mm; Maximum: 700mm
Average face velocity: 0.5m/s
Channel inside fume hood: Easily open and for install nozzles for water and gas, electrical sockets, also for maintenance.
Work top: Chemical resistant, splash & spillage proof dished 20mm Ceramic Work top with built-in rounded edges rim on all four sides
Windows: 6mm toughened glass
Window handle: PVC
Lighting: 30W LED light
Sink: Small size with polypropylene material thickness 5-8mm
Faucet: Use brass body laboratory faucet with international ceramic valve core featured slowly down water pressure. The surface is coated with epoxy resin powder, UV and chemical resistance.
Blower: PP material connected with PVC pipes, corrosion resistance
Base cabinet: 1.2mm thickness cold rolled steel sheet with epoxy resin powder finish
Socket: PC material, size 86X86mm, standards as different countries.
Fume hood can be used widely in the laboratory and ensure optimum protection against hazardous substances, the selection of the appropriate fume hood type depends both on the room conditions of the laboratory and on the type of chemicals used. Especially when using acids, recommendations will be offered.
http://www.cn-labfurniture.com/